Radon Mitigation»Find a Contractor»Minnesota»American Waterworks

American Waterworks

1307 Valleyhigh Dr NW
Rochester, MN 55901

Visit Website

4119 14th Ave N
Fargo, ND 58102
Visit Website

Mon-Fri 8:00am-6:00pm

Radon gas is a major concern for homeowners in Minnesota and Wisconsin. Radon is a colorless, odorless gas that is a known cause of lung caner. Call American Waterworks to ensure that your home is protected with expert radon testing and radon mitigation services. As the local member of the National Radon Defense network, they can provide you with all the products and services you need.

Radon is a naturally occurring, harmful gas that is the leading cause of lung cancer among non-smokers in the country. Radon is undetectable without proper equipment, meaning professional testing is essential. American Waterworks can safely test and treat high levels of radon gas in homes throughout MN and WI.

American Waterworks offers radon testing and thorough inspections to detect the levels of radon gas within your home. They also offer radon mitigation systems to control levels of radon and reduce the amount to a safe level.

American Waterworks Radon Services:

Radon Testing
Thorough Inspection & Accurate Reading of Radon Levels Within Home
Radon Gas Mitigation System Installation

Call American Waterworks today for a free estimate in Mankato, Rochester, Owatonna, Marshall and throughout the surrounding areas of Minnesota and Wisconsin. They provide complete radon services and can ensure that your home is safe and healthy.

Reviews
Testimonials
Before & After
Awards
Team

By Darrell N.

"Good Discussion at Home Show in LaCrosse and willing to solve my problem "

By Virginia S.

By Todd R.

"As a whole, American Waterworks as been great!! Solving our home issues in a timely manner with..."

By Bruce A.

"I am very happy, and thank you and the American Waterworks crews! I got our radon test back (0.7..."

Read More Testimonials

Reviews
Testimonials
Before & After
Awards
Team

American Waterworks Before & After

Before

After

Radon Mitigation in Dodge, WI
Jen S. in Dodge, WI was selling her home and needed a radon mitigation system installed. Her realtor recommended American Waterworks, and we sent our Design Specialist, Kevin Kreofsky, to design a system that was unique to her home. Our Foreman, Dakota Merchlewitz, started the installation process by drilling a hole in the slab foundation of the home and connected a PVC pipe. The radon gas is drawn upward, and the pipe guides it to the fan. The fan draws and vents radon safely above and away from the home.
Before

After

High Levels of Radon in Lewiston, MN
Brandon R. in Lewiston, MN had learned about the dangers of radon gas and decided that he needed to get his home tested. The test results showed a high level of radon. So our Design Specialist, Mac Cole, walked Brandon through the radon mitigation installation process and answered his questions. Brandon wanted to act quickly so his family's health would no longer be compromised, so he had the system installed as soon as possible. Our crew drilled a hole through the floor in the basement to insert a PVC pipe and create a suction point for the radon gas. Then the gas is vented through the pipe and out of the home. A fan is also installed at the top of the PVC pipe where the gas is vented out to ensure that the gas is pushed away from the home. Brandon now has peace of mind knowing that his family is protected from this dangerous gas. According to the World Health Organization, radon causes 15% of the world's lung cancer cases and kills over 20,000 people each year. If you have not gotten your home tested for radon, click here to set up an appointment!
Before

After

High Radon Levels in Cresco, IA
Tim W. of Cresco, IA had a radon level of 10, so he tested it again, but this time it was at 18. He became nervous and didn't enjoy living somewhere with that type of air quality. He found American Waterworks on his local television, so he called the office line and scheduled a time for our Design Specialist, Michel, to go to his home and figure out where to install our Radon Mitigation System. Michel proposed installing it in the attic. Tim was confident in the proposal and got all of his questions answered, so he went ahead with the project. Our Foreman, Geno, and his crew started the installation by drilling a hole in the concrete floor in the basement, forming a suction point. From there, our team installed and connected PVC pipes until they got to the attic, where they installed the system. The purpose of our mitigation system is to pull radon from beneath the ground and lead it out of the home. If the mitigation system isn't working, then no radon can escape the home. Tim had a good experience and he was grateful we were able to help him! Are your radon levels high or are you interested in getting your home tested? Give us a call today to learn more!
Before

After

Radon Mitigation in Eyota, MN
Barbara B in Eyota, MN learned about the dangers of radon gas. She had not yet had her home tested and once she learned that radon causes 15% of the world's lung cancer cases and kills over 20,000 people each year, she wanted to get her home tested right away. She contacted American Waterworks and we sent our Design Specialist, Dustin Loftus, to her home to set up a radon test kit. The results showed that she did have high levels of radon and we recommended that we install a radon mitigation system to ensure that the majority of the radon entering her home would be sucked through a PVC pipe and discharged from her home. Our crew drilled a hole through the floor in the basement to insert a PVC pipe and create a suction point for the radon gas. Then the gas is vented through the pipe and out of the home. A fan is also installed at the top of the PVC pipe where the gas is vented out to ensure that the gas is pushed away from the home. Barbara now has peace of mind knowing that her family is protected from this dangerous gas. Has your home been tested for radon? If not, click here to set up an appointment.