Before & After Photos

This homeowner in Arlington, Massachusetts needed a Radon Mitigation System. They had gotten a radon test done in 2003 and the levels came back at 14 and 16 pCi/l. The pCi/l should be around 4.0 or below.

Erickson Foundation Supportworks, Design Specialist John Prince, was able to come to the homeowner's house and design a radon system for them. After designing a radon system, a team lead, Scott Crandall comes in with their team and installed the radon system in the home. Post-installation, the team checks that everything is working as it should and double-checks that the radon levels have lowered to below 4.0 pCi/l. 

The pictures show what the exterior of the house looked like before and after the radon system was installed. 

Now that the homeowner has their radon levels back to normal they are now able to do further work in their basement.

This homeowner in Arlington, Massachusetts got two tests done for radon. The test came back at 9 and 4 pCi/l which are above the recommended amount for radon. The homeowner decided to call the Erickson Foundation Supportworks to set up an appointment.

Jason Furrey is a Design Specialist at Erickson Foundation Supportworks; he came out to the homeowner's home and designed a radon system for the home. Jason passed the design to Scott Crandall, the Crew Lead for this project. Scott and his crew were able to install the Radon system into the home. They were able to reduce the radon levels to below 4.0 pCi/l. 

This homeowner in Arlington, Massachusetts had concerns about high radon levels that could affect the health of their family. The homeowner decided to test their basements radon levels; the levels came back at 4.5-5.5 pCi/l. Design Specialist Michael Biedrzycki visited the home to see where the best place to install a radon mitigation system would be. After finding out where the system will go, Crew Lead Scott Crandall and his team installed the radon mitigation system in one day. The homeowner was relieved when the system was installed and immediately started to lower the radon levels.

A homeowner in Andover, Massachusetts, had a radon system installed in their home to lower the radon levels. This year they welcomed a child into the world and tested their home for radon again. The results of the test were higher than anticipated, so they reached out to EFS again to have another system installed in their home to lower the radon levels below 4.0 pCi/L.

This homeowner in Andover, Massachusetts, purchased their home in 2019 and it was tested for radon upon purchase. The radon levels in the house came back at an average of 5.3 pCi/L. The homeowners didn't act on installing a radon system right away but in 2023 they called EFS for an inspection of their home. Our Design Specialist met with the homeowner and recommended and designed a radon mitigation system for their home. Our team arrived at the home and installed the system and gave the homeowner a charcoal test to test the radon levels about a week after installation. 

They tested the home and confirmed the results of the test were below 4.0 pCi/L.