Before & After Photos

This Hollis, NH homeowner faced two significant concerns: elevated radon levels at 10 pCi/L and persistent water intrusion in their unfinished basement. Seeking a safe play area for their daughter, they turned to Erickson Foundation Solutions for effective remediation. We installed a comprehensive system including WaterGuard®, a discreet, clog-resistant perimeter drainage mechanism, teamed with our robust TripleSafe™ Sump Pump and IceGuard®, ensuring unfailing water management even through harsh conditions. Meanwhile, our radon mitigation system precisely reduced radon levels, creating a healthier basement environment. Notice the contrast in the photos - from hazard to haven, achieved through skilled expertise.

This homeowner in Goffstown, New Hampshire had high radon levels in their home. They tested their home and the results came back with a pCi/l of 11. The homeowners decided to call Erickson to have someone come look at the home. Design Specialist David Cormier designed a custom radon system for this home. The Crew Lead Scott Crandall and his team installed the Radon System into the home.

A homeowner in Goffstown, New Hampshire, had lived in their home for over 10 years. They had recently learned about radon and decided to call EFS for a free radon inspection. Our Design Specialist recommended a radon mitigation system to be installed in the home. 

Our team installed the Radon Mitigation System into the home to lower the radon levels in their home. 

A homeowner in Goffstown, New Hampshire had a radon mitigation system designed for treating water but lacked a system to prevent radon gas from entering the home. Despite a test result of 2.6pCi/L, within acceptable limits, they sought to guarantee their family's safety, particularly as the basement served as a workout area. Consequently, they contacted Erickson Foundation Solutions, known for our reliable and quality services.

Our Design Specialist, Josh Phillips, recommended installing our radon mitigation system with a fan moisture guard and muffler. The crew started work on the project by creating an extraction point into the foundation floor. At this stage, a radon vent pipe was affixed and extended outside the home, with the radon fan mounted on the side. Additional radon pipes were then attached to the fan, extending up the exterior wall and over the roofline to prevent radon re-entry. After confirming the fan's functionality, a monometer was installed in the basement to measure any changing radon levels.

The installation of the radon mitigation system ensures that the family is protected from radon gas throughout the entire home, including the basement.

Nancy B. of Groton Massachusetts was experiencing high radon levels in their home. The radon levels were tested between 48-56 pCi/L. They have a partly finished basement and would like to have a radon mitigation system installed. Design Specialist John Prince came to the home and inspected the basement. He created a design for a radon mitigation system in the basement that comes out underneath the side steps of the home. 

Crew Lead Josh Provost and his team came to the home and installed the radon mitigation system. Once the radon system was installed the radon levels were reduced dramatically.