Before & After Photos

Before

The home tested at approximately 6.0 pCi/L and did not have an active radon mitigation system in place to reduce radon levels.

After (Planned Work)

A radon mitigation system will be installed to actively reduce radon levels and help create a healthier indoor environment throughout the home.

Before

The home had a radon level of 8.6 pCi/L with multiple foundation areas, including crawl spaces, and no system in place to address all sections.

After

A five-pipe radon mitigation system was installed, covering the crawl spaces and main foundation areas, with exterior venting routed to the back of the home and slab areas properly sealed.

Before:

This home had no radon mitigation in place despite elevated levels. Its cement foundation and complex layout (with two additions) required a custom approach. A sealed sump pump was present but not previously covered.

After:
We installed a two-pipe mitigation system, avoided conflicts with the rear corner water line, and covered the square sump pump. The system now runs neatly out the left side of the house from the center, effectively reducing radon while preparing the home for long-term safety.

Before

Unfinished basement foundation area prior to installation of the radon mitigation system

After

Radon mitigation piping installed along the basement wall to improve airflow beneath the foundation

Before

Utility and basement wall area before interior radon piping installation

After

Interior radon mitigation piping routed cleanly through the utility area toward the garage venting system