Before & After Photos

Before:

Seth R.’s home in Buxton, Maine had water testing that revealed very high arsenic levels, measuring 69.26 µg/L total arsenic (Arsenic III: 6.70 µg/L and Arsenic V: 62.57 µg/L). These levels were significantly above the recommended safe limits for drinking water and required immediate treatment.

While most other water quality parameters were within acceptable ranges, the arsenic concentration made it unsafe for regular household consumption without proper filtration.

After:

We installed a Premier Axis Arsenic System (7 GPM, 1 CF Lead/Lag configuration with monitoring) along with a 4.5" x 20" sediment pre-filter to protect the system and improve overall filtration performance. Additional water quality testing with radon-in-water testing was also completed to ensure the entire water profile was evaluated for safety.

The new treatment setup was installed cleanly and configured to effectively remove arsenic while maintaining strong water flow for the home.

The result was a reliable, professionally installed filtration system that provided safe drinking water and long-term protection for the household.

Another Buxton, Maine home now has properly treated water and the peace of mind that comes with a complete arsenic solution.

We installed a beautiful radon mitigation system in Kennebunkport, ME!

The customer had really high radon in the water and so we installed an airwell. We needed power on the outside of the home to do it and were successful!

Corrine S. in Windham, Maine already had an older water softener in place, but it was no longer addressing the full range of water quality issues in the home. Testing showed elevated iron levels, which were contributing to rust staining, along with a low pH of 6.51, meaning the water was slightly acidic and potentially harder on plumbing fixtures over time.

After reviewing the results and discussing long-term goals, we replaced the outdated system with a new 10" x 54" Evolve CR-100 system with Vortech tank and sweat jacket, along with a 4.5" x 20" sediment filter cartridge kit for additional filtration and protection.

The upgraded system was designed not only to soften the water, but also to raise the pH into a healthier range and reduce iron-related staining and discoloration throughout the home. Corrine also received a lifetime warranty service contract, giving her long-term support and peace of mind moving forward.

Now the home has cleaner, better-balanced water with modern equipment designed to improve water quality, reduce rust issues, and help protect plumbing and fixtures for years to come.

Before:

David V.’s home in Carrabassett Valley, Maine had a water test that revealed arsenic levels of 0.0126 mg/L, which is above the EPA maximum contaminant level of 0.010 mg/L for drinking water. While many other parameters in the water test looked good, the arsenic reading meant the water required treatment to make it safe for long-term household use.

After:
We installed a 1.5 CF Impression Plus metered salt unit along with a dedicated arsenic treatment setup using SBG2-HP mineral anion resin and CR100 zeolite media. A sediment filter was also installed to help protect the system and improve overall performance.

The system was configured to efficiently remove arsenic while maintaining consistent water quality throughout the home. The finished installation was clean, organized, and built to deliver reliable long-term filtration.

Another Carrabassett Valley home now has safer, professionally treated water and peace of mind moving forward.