Cole did a great job getting this interior design installed for our customers

Lung Cancer Survivor Called for Professional Mitigation

After never having tested for radon, a Iowa couple discovered concerning radon levels in the mid-teens using an electronic detector. With the homeowner having survived lung cancer twice, reducing potential radon exposure became an important priority for the household. A short-term charcoal test was also placed to confirm the radon levels before finalizing the scope of the project. Based on the testing results, a single-point radon mitigation system is planned for the front corner of the home, with the system exiting through the side.

Radon Mitigation System for Finished Ranch Home With Levels of 6

After radon testing showed levels of 6 pCi/L, the homeowners decided it was time to install a professional radon mitigation system to protect their newer ranch walkout home. The basement is mostly finished, making careful system design important for both performance and appearance. The plan includes a sub-slab extraction point near the plumbing stack with routing through the poured foundation into the garage. From there, the system will run into the attic where the radon fan will be installed before penetrating the roof on the backside of the home to avoid the solar panels. Minor sealing around the sump pit gaskets will also help improve radon reduction and indoor air quality.

Simple Radon Fix for a Basement: One-Point Radon Mitigation

Justin and his wife had owned their home for about a year when radon became impossible to ignore. Their basement was half dirt, half concrete, and even after encapsulating the dirt side, the levels stayed high. With indoor air quality already a concern from a past home, they decided it was time to fix the problem, not chase it. A one-point radon mitigation system will be installed beneath the vapor barrier near the sump, then routed up and out the east exterior wall. A little extra taping may be needed where the barrier meets concrete, but the layout is simple, effective, and built to bring levels down. Sometimes one smart step changes everything. Here, it’s clean air, lower radon, and peace of mind finally settling in.

Radon Mitigation System Installed in Home with Elevated 6 pCi/L Radon Level

After living in several homes with radon mitigation systems, these homeowners understood the importance of addressing elevated radon levels. When testing showed a reading of 6 pCi/L in their current home, they decided to take action, especially with their son living in the basement where radon can accumulate. The project includes replacing and sealing the sump beneath the stairs, with a radon extraction point in the northeast corner of the home. The system will run up and out from that location, and a fan cover will be installed because of its proximity to the street. With electrical access nearby, the installation is designed to address the home's radon concerns while keeping the system practical and discreet.