Click on a photo to enlarge.
The main basement area had no radon mitigation system in place, with open floor space and no visible piping or suction points.
A radon mitigation pipe was installed in the main basement area, positioned to create an effective suction point while maintaining a clean and unobstructed layout.
The small unfinished basement had no radon mitigation system in place, with no piping or suction point installed.
A radon mitigation pipe was installed in the basement, creating an effective suction point within the limited space.
The exterior of the condo had no radon mitigation system in place, with no visible piping along the building.
A radon mitigation pipe was installed on the exterior and routed to safely vent above the roofline.
The home had a radon level of 12 pCi/L with no mitigation system in place and an unfinished basement requiring full coverage.
A two-pipe radon mitigation system was installed with extraction points near the washing machine and rear walkout area, vented out the right side of the home.
The home had an existing radon mitigation system that had been in place for approximately 25 years. A service visit was scheduled to assess the system and address any maintenance needs.
The service visit was completed with no changes to the existing system reported. The current fan is a Festa Eagle Extreme. If a fan replacement is needed. Continuous radon monitoring (CRM) is available to help the homeowner track radon levels over time.