Before & After Photos

ARD was brought in to reduce radon levels in a home on a finished basement and 2 sump pits.  The existing pumps needed to be modified to enable the sump lids to be sealed before we could begin.  We scheduled the install to happen just after plumber modified sump pumps so homeowner could have a quick turnaround time.  We put the system in and it reduced the radon flawlessly!

ARD was contact to install a radon gas mitigation system on a finished basement home. We sealed up the two sump pits to prevent radon gas entry. Next we had to core into the slab to create a suction point on an exterior wall to avoid routing the pipe through the finished basement. The radon reduction was extremely effective and client was thrilled to avoid pipe running through their finished basement!

Apex was hired by a client to install a high rise sump cover coupled with an ASD system to reduce the radon levels. We were able to have the sump plumbing modify to fit the high rise cover perfectly to retain the function of the water backup sump pump.  This system got the radon down to 0.8 within 12 hours of the system being turned on!

WE installed a sub slab depressurization system on a new construction slab home with radon levels at 22pCi/L.  We were able to minimize the visibility of the interior piping by routing it through a closet and out of the way of daily life. Client was thrilled when the post mitigation results came back at 0.2pCi/L, as low as you can possible reduce radon levels!

Apex Radon Defense was hired to replace an old, damaged radon mitigation system with a new system. We removed all the old piping and fan and replaced it with a new system that lowered the radon far more than the previous system had. Client was relieved to have the problem rectified!